/*******************************************************************************
*
*   FUNKTION     :   Liste aller Konfigurationsparameter zum Update der Dreh-PPs
*
*   DATUM        :   12.8.2010
*                    letzte Erweiterung:  7.11.2018
*
*   Copyright (C) 2010 - 2018 AdCAM Technologies GmbH
*
*   *** Diese Datei nicht manuell editieren, sonst keine Funktionsgarantie !!
*
*******************************************************************************/

/* [Zyklen-Adresswoerter]
*/
   string cycleModalityInterrupt = "";
   PPAddressWord CYC_00 = <"DUMMY",0.0,true,-99999.0,99999.0,0.001,false,".",false,false,-1,5,-3,1.0>;

   /* [Addresswords]

   Text<_Help_Addresswords>
>
   ORIGIN_GROUP.word    = Text<_Adressen_ORIGIN_GROUP>
   DELAY.word           = Text<_Adressen_DELAY> Text<_Adressen_DELAY_example>
   LIMIT_SPEED.word     = Text<_Adressen_LIMIT_SPEED> Text<_Adressen_LIMIT_SPEED_example>
   SPINDL_T.word        = Text<_Adressen_SPINDL_T> Text<_Adressen_SPINDL_T_example>
   PITCH.word           = Text<_Adressen_PITCH>
*/

   /* [PP-Functions]

   Text<_Help_PP_Functions>
>
   DIRECTION_WORD[3]    = Text<_PP_Funktionen_DIRECTION_WORD3>
   DIRECTION_WORD[4]    = Text<_PP_Funktionen_DIRECTION_WORD4>
   DIRECTION_WORD[5]    = Text<_PP_Funktionen_DIRECTION_WORD5>

   DIRECTION_T_WORD[3]  = Text<_PP_Funktionen_DIRECTION_T_WORD3>
   DIRECTION_T_WORD[4]  = Text<_PP_Funktionen_DIRECTION_T_WORD4>
   DIRECTION_T_WORD[5]  = Text<_PP_Funktionen_DIRECTION_T_WORD5>

   TRANSMIT_WORD[0]     = Text<_PP_Funktionen_TRANSMIT_WORD0>
   TRANSMIT_WORD[1]     = Text<_PP_Funktionen_TRANSMIT_WORD1>

   C_AXIS_WORD[0]       = Text<_PP_Funktionen_C_AXIS_WORD0>
   C_AXIS_WORD[1]       = Text<_PP_Funktionen_C_AXIS_WORD1>
*/

   /* [Parameter]

   Text<_Help_Parameter_>
>
   delayTimeWithRev             = Text<_Parameter_delayTimeWithRev> Text<_Parameter_delayTimeWithRev_example>
   no_ToolChangeWithAxisValue   = Text<_Parameter_no_ToolChangeWithAxisValue>
   warten_Spindeldrehzahl       = Text<_Parameter_warten_Spindeldrehzahl>
   G33_drill                    = Text<_Parameter_G33_drill>
   modal_G33_drill              = Text<_Parameter_modal_G33_drill> (true / false)
*/

   /* [Start_Ende]

   Text<_Help_Start_Ende>
>
   SYNCHRO:           = Text<_Help_SYNCHRO>
   !SYNCHRO:          = Text<_Help_noSYNCHRO>
   #<!SYNCHRO>        = Text<_Help_stopSYNCHRO>
>
   #<nr>              = Text<_Help_nr>
   #<NR>              = Text<_Help_NR>
   #<name>            = Text<_Help_name_Start_Ende>
   #<0> - #<xx>       = Text<_Help_0_xx_Start_Ende>
   #<List>            = Text<_Help_List_Start_Ende>
   -->21                Text<_Help_List_1_Start_Ende>
   -->21                Text<_Help_List_2_Start_Ende>
   #<GEAR>            = Text<_Help_GEAR_Start_Ende>
   #<LIMIT_SPEED>     = Text<_Help_LIMIT_SPEED_Start_Ende>
   #<REVOLVER>        = Text<_Help_REVOLVER>
   #<WAIT>            = Text<_Help_WAIT>
   #<T_off>           = Text<_Help_T_off>
   #<PoweredToolStop> = Text<_Help_PoweredToolStop>
   $<ToolList()>      = Text<_Help_ToolList>
>
   $<spannung_l>      = Text<_Help_spannung_l>
   $<spannung_a>      = Text<_Help_spannung_a>
*/
   programStartLines[0] = "";                   // Text<_toolTip_programStartLines>
   programEndLines[0] = "";                     // Text<_toolTip_programEndLines>

   format_programmnummer = 0;                   // Text<_toolTip_format_programmnummer>

   start_lineNumber = "";                       // Text<_toolTip_start_lineNumber>
   end_lineNumber = "";                         // Text<_toolTip_end_lineNumber>
   no_lineNumber = "";                          // Text<_toolTip_no_lineNumber>
   delete_firstCharacter = "";                  // Text<_toolTip_delete_firstCharacter>
   subprogramm_lineNumber = true;               // Text<_toolTip_subprogramm_lineNumber>
   file_DoLineNumbering = "";                   // Text<_toolTip_file_DoLineNumbering>

   configline_ToolList = "";                    // Text<_toolTip_configline_ToolList>

   /* [Werkzeugwechsel]

   Text<_Help_Werkzeugwechsel>
>
   Text<_Help_Bedingungen>
>
   SYNCHRO:         = Text<_Help_SYNCHRO>
   !SYNCHRO:        = Text<_Help_noSYNCHRO>
   REV1:            = Text<_Help_REV1>
   REV2:            = Text<_Help_REV2>
   FIX:             = Text<_Help_FIX>
   ROT:             = Text<_Help_ROT>
   ROT1:            = Text<_Help_ROT1>
   !ROT1:           = Text<_Help_noROT1>
   !1:              = Text<_Help_no1>
   WAIT_pastT:      = Text<_Help_WAIT_pastT_condition>
   !WAIT_pastT:     = Text<_Help_noWAIT_pastT>
>
   Text<_Help_Parameter>
>
   #<T>             = Text<_Help_T>
   #<Tcall>         = Text<_Help_Tcall>
   #<T_off>         = Text<_Help_T_off>
   #<D>             = Text<_Help_D>
   #<RAD_CORR>      = Text<_Help_RAD_CORR>
   #<ID>            = Text<_Help_ID>
   #<P_C>           = Text<_Help_P_C>
   #<Tool_C>        = Text<_Help_Tool_C>
   #<Rev>           = Text<_Help_Rev>
   #<WAIT_pastT>    = Text<_Help_WAIT_pastT>
   #<ORIGIN>        = Text<_Help_ORIGIN>
   #<SPINDL>        = Text<_Help_SPINDL>
   #<SPEED>         = Text<_Help_SPEED>
   #<S/V>           = Text<_Help_SorV>
   #<S+V>           = Text<_Help_S_V>
   #<GEAR>          = Text<_Help_GEAR>
   #<LIMIT_SPEED>   = Text<_Help_LIMIT_SPEED>
   #<DIRECTION>     = Text<_Help_DIRECTION>
   #<FEDRAT>        = Text<_Help_FEDRAT>
   #<Text>          = Text<_Help_Text>
   #<-C_OFF>        = Text<_Help__C_OFF>
   #<C_OFF>         = Text<_Help_C_OFF>
   #<C_ON>          = Text<_Help_C_ON>
   #<G96_Stop>      = Text<_Help_G96_Stop>
   #<TP.x>          = Text<_Help_TPx_turn>
   #<TP.y>          = Text<_Help_TPy_turn>
   #<TP>            = Text<_Help_TP_turn>
   #<AXIS1>         = Text<_Help_AXISz>
   #<AXIS2>         = Text<_Help_AXISx>
   #<PROCESSTYPE>   = Text<_Help_PROCESSTYPE>
   #<Tooldata.xxx>  = Text<_Help_Tooldata>
   #<ResetModality> = Text<_Help_ResetModality>
   #<END>           = Text<_Help_End>
*/
   toolChangeLines[0] = "";                     // Text<_toolTip_toolChangeLines>

   firstToolChangeLines[0] = "";                // Text<_toolTip_firstToolChangeLines>

   toolChange_P_Lines[0] = "";                  // Text<_toolTip_toolChange_P_Lines>

   wkzWechselOhnePlatzwechsel[0] = "";          // Text<_toolTip_wkzWechselOhnePlatzwechsel>

   format_wkzNummer = 0;                        // Text<_toolTip_format_wkzNummer>
   multipleCutters = false;

   resetModalityAddresses = "GWEG,ORIGIN,AXIS1,AXIS2,AXIS3,AXIS4,SPINDL,SPEED,FEDRAT,DIRECTION,COOLNT"; // Text<_toolTip_resetModalityAddresses>

   reset_wkz_wechsel_pos = false;               // Text<_toolTip_reset_wkz_wechsel_pos>

   outToolChange_Loadtl = true;                 // Text<_toolTip_outToolChange_Loadtl>
   last_tool_off = "";                          // Text<_toolTip_last_tool_off>
   zusatz_Revolvernase = "";                    // Text<_toolTip_zusatz_Revolvernase>

   /* [Seitenwechsel]

   Text<_Help_Seitenwechsel_turn>
>
   Text<PreDef_nameProcessType0> Text<PreDef_nameProcessType1> Text<PreDef_nameProcessType2> Text<PreDef_nameProcessType3>   Text<_Help_Bearbeitungsseite>
>
   #<ORIGIN>         = Text<_Help_ORIGIN>
   #<SideName>       = Text<_Help_SideName>
*/
   changeSideLines[0] = "";                     // Text<_toolTip_changeSideLines_turn>

   default_origin_nr = 0;                       // Text<_toolTip_default_origin_nr>

   /* [Korrekturschalter]

   Text<_Help_Korrekturschalterwechsel>
>
   #<T> = Text<_Help_T>
   #<D> = Text<_Help_D>
*/
   format_korrNummer = 0;                       // Text<_toolTip_format_korrNummer>
   config_korrschalterwechsel = "";             // Text<_toolTip_config_korrschalterwechsel>
   index_new_correction = -1;                   // Text<_toolTip_index_new_correction>
   new_correction = INT_UNDEF;                  // Text<_toolTip_new_correction>

   glob_exist_y_axis = false;                   // Text<_toolTip_glob_exist_y_axis>

   /* [Getriebestufen]

   Text<_Help_Getriebestufen>
>
   Text<_Help_Getriebestufen_text>
*/
   GEAR_WORD[0] = "";                           // Text<_toolTip_GEAR_WORD>

   /* [Kuehlmittel]

   Text<_Help_Kuehlmittel>
>
   Text<_Help_Kuehlmittel_text>
*/
   COOLNT_WORD[0] = "";                         // Text<_toolTip_COOLNT_WORD>
   COOLNT_OFF[0] = " M9";                       // Text<_toolTip_COOLNT_OFF>

   ncProgExt = "";                              // Text<_toolTip_ncProgExt>
   ncSubProgExt = "";                           // Text<_toolTip_ncSubProgExt>
   textFileExt = "";                            // Text<_toolTip_textFileExt>

   vorAbstechen = "";                           // Text<_toolTip_vorAbstechen>
   nachAbstechen = "";                          // Text<_toolTip_nachAbstechen>

   var_list_file = "";                          // Text<_toolTip_var_list_file>

   /* [ProgrammStop]

   Text<_Help_ProgrammStop>
>
   #<text>   = Text<_Help_stop_text>
   #<zeile>  = Text<_Help_stop_zeile>
   #<Reset>  = Text<_Help_ResetModality>
   #<C_OFF>  = Text<_Help_C_OFF>
*/
   progStopLines[0] = "";                       // Text<_toolTip_progStopLines>

   /* [Doppelschlitten]

   Text<_Help_Doppelschlitten>
>
   #<nr>              = Text<_Help_nr>
   #<REVOLVER>        = Text<_Help_REVOLVER>
   #<!REVOLVER>       = Text<_Help_REVOLVER_>
   #<WAIT>            = Text<_Help_WAIT>
   #<PoweredToolStop> = Text<_Help_PoweredToolStop>
   #<Component>       = Text<_Help_Component>
*/
   channel_Start[0] = <1,"">;                   // Text<_toolTip_channel_start>

   channel_End = "M30";                         // Text<_toolTip_channel_End>
   channel_separatedEditor = 0;
   waitmarkdef = "";                            // Text<_toolTip_waitmarkdef>
   waitmark_channel = "";                       // Text<_toolTip_waitmark_channel>
   DS_search_Start = "";                        // Text<_toolTip_DS_search_Start>
   synchro_start = 10;                          // Text<_toolTip_synchro_start>
   synchro_index_increment = 10;                // Text<_toolTip_synchro_index_increment>
   synchro_stellen = 0;                         // Text<_toolTip_synchro_stellen>
   synchro_blocknumber = "";                    // Text<_toolTip_synchro_blocknumber>
   ausgabe_tech_ohne_fuehrend = true;           // Text<_toolTip_ausgabe_tech_ohne_fuehrend>
   SET_LEADING_word = "";                       // Text<_toolTip_SET_LEADING_word>
   SET_NO_LEADING_word = "";                    // Text<_toolTip_SET_NO_LEADING_word>

   programStartDS_Lines[0] = "";                // Text<_toolTip_programStartDS_Lines>

   changeTurretLines[0] = "";                   // Text<_toolTip_changeTurretLines>

   /* [Zusatzkomponenten]

   Text<_Help_Zusatzkomponenten>
>
   #<posVon>       = Text<_Help_posVon>
   #<posNach>      = Text<_Help_posNach>
   #<vorschub>     = Text<_Help_FEDRAT>
   #<drehzahl>     = Text<_Help_SPINDL>
   #<hub>          = Text<_Help_hub>
   #<arm>          = Text<_Help_arm>
   #<l1>           = Text<_Help_l1>
   #<command>      = Text<_Help_command>
   #<magNum>       = Text<_Help_MagNr>
   #<magPos>       = Text<_Help_T>
   #<korrSchalter> = Text<_Help_D>
   #<C_OFF->       = Text<_Help_C_OFF_>
>
   $<c_posVon>     = Text<_Help_c_posVon>
   $<c_posNach>    = Text<_Help_c_posNach>
*/
   reitstock_Lines[0] = "";                     // Text<_toolTip_reitstock_Lines>

   lynette_Lines[0] = "";                       // Text<_toolTip_lynette_Lines>

   /* [Anschlag]

   Text<_Help_Anschlag>
>
   #<posVon>       = Text<_Help_anschlag_posVon>
   #<posNach>      = Text<_Help_anschlag_posNach>
   #<vorschub>     = Text<_Help_FEDRAT>
   #<verweilzeit>  = Text<_Help_verweilzeit>
   #<winkel>       = Text<_Help_winkel>
   #<zusatz>       = Text<_Help_zusatz>
   #<C_OFF+>       = Text<_Help_C_OFF__>
*/
   anschlag_Lines[0] = "";                      // Text<_toolTip_anschlag_Lines>

   /* [Komponentenprogramm]

   Text<_Help_Komponentenprogramm>
>
   #<nr>           = Text<_Help_nr>
   #<WAIT>         = Text<_Help_WAIT>
*/
   component_Lines[0] = "";                     // Text<_toolTip_component_Lines>

   separat_component_programm = false;          // Text<_toolTip_separat_component_programm>

   /* [Unterprogrammparameter]

   Text<_Help_Unterprogrammparameter>
>
   #<Nr>     = Text<_Help_subProg_Nr>
   #<Name>   = Text<_Help_subProg_Name>
   #<LINE>   = Text<_Help_subProg_LINE>
   <#>       = Text<_Help_subProg_number>
   #<ori_nr> = Text<_Help_subProg_ori_nr>
   #<Diff>   = Text<_Help_subProg_Diff>
   #<0>      = Text<_Help_subProg_0>
*/
   subStart_begin = "";                         // Text<_toolTip_subStart_begin>
   subStart_end = "";                           // Text<_toolTip_subStart_end>
   subStart_parameter = "";                     // Text<_toolTip_subStart_parameter>
   subEnd_parameter = "";                       // Text<_toolTip_subEnd_parameter>
   subCall_parameter = "";                      // Text<_toolTip_subCall_parameter>
   index_editor_subprog = INT_UNDEF;            // Text<_toolTip_index_editor_subprog>

   subCall_offset_add = "";                     // Text<_toolTip_subCall_offset_add>
   subCall_offset_abs = "";                     // Text<_toolTip_subCall_offset_abs>
   subCall_offset_stopAdd = "";                 // Text<_toolTip_subCall_offset_stopAdd>
   subCall_offset_stopAbs = "";                 // Text<_toolTip_subCall_offset_stopAbs>

   subStart_repeat = "";                        // Text<_toolTip_subStart_repeat>
   subEnd_repeat = "";                          // Text<_toolTip_subEnd_repeat>
   subCall_repeat = "";                         // Text<_toolTip_subCall_repeat>
   subRepeatNumber = INT_UNDEF;                 // Text<_toolTip_subRepeatNumber>
   repeat_kennung = "";                         // Text<_toolTip_repeat_kennung>
   lbl_repeat_number = 1;                       // <lbl_repeat_number>: Text<_toolTip_lbl_repeat_number_turn>

   modeSubDrill = 1;                            // <modeSubDrill>: Text<_toolTip_modeSubDrill>
   startIndexSubDrill = 200;                    // <startIndexSubDrill>: Text<_toolTip_startIndexSubDrill>
   default_NameSubDrill = "";                   // <default_NameSubDrill>: Text<_toolTip_default_NameSubDrill>
   startIndexCondition = 600;                   // <startIndexCondition>: Text<_toolTip_startIndexCondition>
   default_NameCondition = "";                  // <default_NameCondition>: Text<_toolTip_default_NameCondition>

   SubProgramTypeAbsoluteValid = false;
   SubProgramTypeIncrementalValid = false;
   SubProgramLocationInsertValid = false;
   SubProgramLocationAppendValid = false;

   /* [Bohrzyklen]

   Text<_Help_Bohrzyklen>
>
   #<GWEG>              = Text<_Help_GWEG>
   #<GWEG(1)>           = Text<_Help_GWEG1>
   #<AXIS1>             = Text<_Help_AXISz_drill>
   #<AXIS2>             = Text<_Help_AXISx_drill>
   #<AXIS3>             = Text<_Help_AXISy_drill>
   #<AXIS_C>            = Text<_Help_AXIS_C>
   #<CYC_%%(<exp>)>     = Text<_Help_CYC_exp>
   #<FEDRAT>            = Text<_Help_FEDRAT>
   #<FEDRAT(<exp>)>     = Text<_Help_FEDRAT_exp>
   #<SPINDL>            = Text<_Help_SPINDL_mod>
   #<C_ON>              = Text<_Help_C_ON>
   #<name>              = Text<_Help_name_pos>
   #<symbol>            = Text<_Help_symbol>
   #<comment>           = Text<_Help_comment>
>
   #<bohrtiefe>         = Text<_Help_bohrtiefe>
   #<referenztiefe>     = Text<_Help_referenztiefe>
   #<referenztiefeOrig> = Text<_Help_referenztiefeOrig>
   #<tiefenOffset>      = Text<_Help_tiefenOffset>
   #<anbohrtiefe>       = Text<_Help_anbohrtiefe>
   #<vorschub>          = Text<_Help_FEDRAT>
   #<anbohrvorschub>    = Text<_Help_anbohrvorschub>
   #<drzFaktor>         = Text<_Help_drzFaktor>
   #<rueckz_v>          = Text<_Help_rueckz_v>
   #<rueckzDrzFaktor>   = Text<_Help_rueckzDrzFaktor>
   #<rueckz_ebene>      = Text<_Help_rueckz_ebene>
   #<verweilzeit>       = Text<_Help_verweilzeit_>
   #<verweilzeit_n>     = Text<_Help_verweilzeit_n>
   #<bohrtiefe_1>       = Text<_Help_bohrtiefe_1>
   #<bohrtiefe_n>       = Text<_Help_bohrtiefe_n>
   #<degression>        = Text<_Help_degression>
   #<rueckz_wert>       = Text<_Help_rueckz_wert>
   #<richtwinkel>       = Text<_Help_richtwinkel>
   #<richtabstand>      = Text<_Help_richtabstand>
   #<endeTiefe>         = Text<_Help_endeTiefe>
   #<endeVorschub>      = Text<_Help_endeVorschub>
>
   #<n>                 = Text<_Help_n>
>
   Text<_Help_glob_turn>
>
   Text<_Help_glob_Var>
   cyc_start                = Text<_Help_cyc_start_t>
   cyc_ref_pos              = Text<_Help_cyc_ref_pos>
   cyc_referenztiefe_pos    = Text<_Help_cyc_referenztiefe_pos>
   cyc_tiefe                = Text<_Help_cyc_tiefe>
   cyc_end                  = Text<_Help_cyc_end>
   drillFaktor              = Text<_Help_drillFaktor>
   glob_sicherheitsabstand  = Text<_Help_glob_sicherheitsabstand>
   glob_wkz_gewindesteigung = Text<_Help_glob_wkz_gewindesteigung>
   glob_wkz_drehrichtung    = Text<_Help_glob_wkz_drehrichtung>
   akt_wkz_drehrichtung     = Text<_Help_akt_wkz_drehrichtung>
   akt_wkz_M_richtung       = Text<_Help_M_richtung>
*/
   cycle_end = "";                              // Text<_toolTip_cycle_end>
   cycle_repeat_para = false;                   // Text<_toolTip_cycle_repeat_para>
   cyc_end_without_retract = 0;                 // Text<_toolTip_cyc_end_without_retract>
   cycle_StartBlock_isDefinition = false;       // Text<_toolTip_cycle_StartBlock_isDefinition>
   cycle_end_before_repeat = false;             // Text<_toolTip_cycle_end_before_repeat>
   cycle_parameter_modal = true;                // Text<_toolTip_cycle_parameter_modal>
   cycle_StartBlocks[0] = "";                   // Text<_toolTip_cycle_StartBlocks>
   cycle_RepeatBlocks[0] = "";                  // Text<_toolTip_cycle_RepeatBlocks>
